E-mail：sales1@zhrollformingmachine.com
Components:double layer roll forming machine
Tr18/Tr35 Double layer roof panels forming machine
specifications
1 |
Power Requirement
| Voltage | 380v/3ph/50hz |
Main Motor power | 5.5kw | ||
Cutter power | 4kw | ||
2 | Forming speed | 10-20m/min | |
3 | Forming stations | 15 row /16 row | |
4 | Forming shaft diameter | 75mm | |
5 | Chains | 1 inch | |
6 | Type of cutting | Roll formed and length-set cutting | |
7 | Control system | PLC Delta Brand | |
8 | Install dimension(depend on the final design) | 9.8m×1.5m×1.8m | |
9 | Total weight (Approx) | 7.5T | |
Components of line:
1) Manual De-coiler ------------------------------------------------------ 1 set
2) Guiding Device---------------------------------------------------------1 set
3) Roll Forming System--------------------------------------------------- 1set
4) Cutting Device---------------------------------------------------------- 1set
5) Hydraulic System------------------------------------------------------- 1 set
6) PLC Control System----------------------------------------------------1 set
7) Run out table ----------------------------------------------------------- 1 set
Spare parts List
No. | Item | Qty |
1 | Limited switch | 2 |
2 | Chains | 1 |
3 | Value | 1 |
4 | Relay | 1 |
5 | Chains Joint | 2 |
6 | Encoder wheels | 2 |
Copyrights © Cangzhou ZhongHeng Machine Manufacture Co.,ltd All Rights Reserved
