E-mail：sales1@zhrollformingmachine.com
Components:Decoiler, Main Machine, PLC, Hydraulic System, Run out Table
Galvanized Steel Floor Deck Panel Roll Forming Machine
Instead of concrete floor, steel deck resists the vertical loading associated with the weight of the concrete and the construction loads. Based on the needs, we developed floor decking Roll Forming Machine to make the production of floor deck in a huge production. For this kind of machine, the working speed could reach 25m/min and the thickness from 1-3mm.Our company also have Closed Floor Decking Forming Machine,Triple Floor Decking Forming Machine.
What's Composite Floor Deck?
A composite steel deck combines the high tensile strength of steel with the compressive strength of concrete to improve design efficiency and reduce the material necessary to cover a given area. Additionally, composite steel decks supported by composite steel joists can span greater distances between supporting elements(Such as C Purlins, Z Purlin, H Steels). And have reduced live load deflection in comparison to previous construction methods.
Click Here to check the video
Advantages of Floor decking forming machine are as follows:
1.Floor decking sheet produced by this machine has the features of low cost , light weight buy high strength , shourt building period and re-cycle use .
2.Save material with no waste
3.Easy operation , low maintenance cost
4.One machine for 3 models for optional (by changing spacers)
Technical Parameters
| NO. | ITEM | PARAMETER | NOTE | |
| 1. | Suitable material | Type | Galvanized sheet | |
| Width(mm) | 1200mm-1250mm | |||
| Thickness(mm) | 0.8mm-1.6mm | |||
| Yield stress(mm) | G550mpa | |||
| 2. | Product specifications | Detail as the attached file | ||
| Length | Any length | |||
| 3. | Power requirement | Type | 380v/3ph/50hz | |
| Main Motor power | 15.5kw+15.5KW | |||
| Cutter power | 11kw | |||
| 4. | Forming speed(m/min) | 8-15 | Not include the time of cutting | |
| 5. | Hydraulic Decoiler | Type | Manual | |
| Max capacity | 7ton | |||
| Suitable coil OD(MM) | 1250 | |||
| Suitable coilID(MM) | 508 | |||
| 6. | Forming stand | 32 | Depend on actual design | |
| 7. | Thickness of structure | 20mm A3 steel plate | ||
| 8. | Forming shaft diameter(mm) | 100 cr15 | ||
| 9. | Type of cutting | Roll formed and length-set cutting | ||
| 10. | Control system | PLC and inverter | Panasonic brand | |
| 11. | Install dimension(depend on the final design) | 13.2m×1.5m×1.55m | Without panel length | |
| 12. | Total weight(Approx) | 12T | Depend on final design | |
More Floor Deck profile designs for your reference
Trade Terms
1.Payment Term:30% paid by T/T as down payment,Balance 70% after inspection before delivery. After finish production, we will inspect the machine and inform the buyer, the buyer come inspect goods, then pay the balance before shipping.
2.Delivery Time:We guarantees the equipment will be ready for shipment within 30 working days after receipt of deposit .
3.Port of Loading: Tianjin
After sale service
1.Warranty: We provide one year free warranty , and technical support for entire life .
During the warranty, the replaceable parts are free,buyers need to pay for the shipping .We will also provide you instruction manual to show you how to operate the machines.
2.Installation and trainning:We could send technician to your country to install machine if you need. The buyer need to pay extra cost, including:visa, round trip tickets, accommodation, salary of USD 100~120 per day.
Contact us for more information about roll forming machine and slitting line .
Copyrights © Cangzhou ZhongHeng Machine Manufacture Co.,ltd All Rights Reserved
