E-mail：sales1@zhrollformingmachine.com
Components:Decoiler, Main Machine, PLC, Hydraulic System, Run out Table
Color Steel Ridge Cap Forming Machine
Universal Ridge Flashing is designed to be installed at the ridge of your building. Striations and bends on the flashings provide strength as well as good looks. The ridge flashing combined with sealant provides a watertight seal for your roof.
| NO. | ITEM | PARAMETER | NOTE | |
| 1. | Suitable material | Type | Pre-painted sheet, Galvanized sheet | |
| Width(mm) | 460mm | |||
| Thickness(mm) | 0.3-0.8mm | |||
| Yield stress(mm) | G220-G300 | |||
| 2. | Product specifications | Detail as the attached file | ||
| Length | Any length | |||
| 3. | Power requirement | Type | 380v/3ph/50hz | Motor brand shanghai Lichao |
| Main Motor power | 3kw | |||
| Cutter power | 4kw | |||
| 4. | Forming speed(m/min) | 2-3m/min | Not include the time of cutting | |
| 5. | Manual Decoiler(Optional) | Type | Manual | |
| Max capacity | 5t | |||
| Suitable coilID(MM) | 508 | |||
| 6. | Forming stand | 14 | Depend on actual design | |
| 7. | Thickness of structure | 14mm | ||
| 8. | Forming shaft diameter(mm) | 70 | ||
| 9. | Type of cutting | Roll formed and length-set cutting | ||
| 10. | Control system | Panasonic PLC and inverter | ||
| 11. | Install dimension(depend on the final design) | 7.8m×1.5m×1m | Without panel length | |
| 12. | Total weight(Approx) | 3.4T | Depend on final design | |
Metal roofing “ridge cap” is the trim placed along the roof’s ridge – the peak, where two roof slopes meet up.
A ridge cap is normally installed only after all metal roof panels and any other trim are in place. In other words, it’s put on last – the cap to the job.
Most ridge cap comes in pieces 10’6” long. They are meant to cover 10’ of ridge, with 6” of overlap between pieces.
ZHONGHENG also have Coil Process Equipments(Slitting Line, Cut To Length Line), C Purlin Roll Forming Machine, Roof Sheet Roll Forming Machine. Wall Cladding Roll Forming Machine, Steel Deck Roll Forming machine, etc for One-Stop service for your steel structure plan.
Copyrights © Cangzhou ZhongHeng Machine Manufacture Co.,ltd All Rights Reserved
