E-mail：sales1@zhrollformingmachine.com
Aug. 02, 2021
2021 hot sale new machine colour steel /galvanized/ aluminum ridge cap sheet metal roll forming machine from China
The aluminum roof ridge cap making machine is one of the most popular roll forming machines.
It is made into different shapes of colored steel ridge cap plates, which are used in construction, factories, supermarkets, etc.Very beautiful.
The coil width suitable for this machine is 400mm, and the thickness range is 0.2mm to 0.4mm.
We use the guide pin type to make the frame sturdy.
Usually it can run at a maximum speed of 20m/min, and the PLC with touch screen makes the machine simple and easy to use.
Quick Details
Condition:
Type:
Tile Type:
Use:
Production Capacity:
Place of Origin:
Brand Name:
Voltage:
Dimension(L*W*H):
Weight:
Certification:
Warranty:
Key Selling Points:
Rolling thinckness:
Feeding width:
Machinery Test Report:
Video outgoing-inspection:
Marketing Type:
Technical Parameters
A Sheet Specifications
1. | Coil Type | Pre-painted coil,Galvanized steel,Aluminum |
2. | Width | 400mm |
3. | Thickness range | 0.2-0.4mm |
4. | Yield stress(mm) | Q235 |
B Machine Specifications
1 |
Power Requirement
| Voltage | 380v/3ph/50hz |
Main Motor power | 4kw | ||
Cutter power | 3kw | ||
2 | Forming speed | 8-10m/min | |
3 | Forming stations | 11 | |
4 | Thickness of structure | 16mm | |
5 | Forming shaft diameter | 70mm | |
6 | Chains | Double 0.6inch | |
7 | H steel | 350mm | |
8 | Sleeve | galvanized pipe with color coating | |
9 | Screen | Text screen /touch screen | |
10 | Type of cutting | Roll formed and length-set cutting | |
9. | Control system | PLC sanjing and Inveter sanjing | |
10. | Install dimension(depend on the final design) | 6.6m×1.5m×1.2m | |
11. | Total weight (Approx) | 2.5T | |
Manual Decoiler |
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled automatically. Loading capacity:1.5T Inner diameter: 450-508mm |
Guiding Device
|
Adopt guiding bar and sliding block to control the width and position of the steel sheet. Pre-cutter used to cut sheet before roll forming , saving material .
|
Roll Forming System
|
Material of rollers:45# steel，roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
|
Cutting device
|
A. Adopts post cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no material wasted. B. Adopts welded frame for good rigidity. C. The cutting action is drove by the power from hydraulic station which guarantees the procession of the cutting and low noisy, long life. |
Hydraulic System
|
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
|
PLC Control System
|
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC:Delta |
Components of line
1) Manual De-coiler ------------------------------------------------------ 1 set
2) Guiding Device--------------------------------------------------------- 1 set
3) Roll Forming System--------------------------------------------------- 1set
4) Cutting Device---------------------------------------------------------- 1set
5) Hydraulic System------------------------------------------------------- 1 set
6) PLC Control System---------------------------------------------------- 1 set
Previous : ZH-310 Colour Steel Selck Lock Roof Panel Roll Forming Machine Roof Forming Machinery from Cangzhou
Copyrights © Cangzhou ZhongHeng Machine Manufacture Co.,ltd All Rights Reserved
