E-mail：sales1@zhrollformingmachine.com
Components:Decoiler, Main Machine, PLC, Hydraulic System, Run out Table
| NO. | ITEM | PARAMETER | NOTE | |
| 1. | Suitable material | Type | Pre-painted sheet, Galvanized sheet | |
| Width(mm) | 1220mm | |||
| Thickness(mm) | 0.3-0.8mm | |||
| Yield stress(mm) | G220-G300 | |||
| 2. | Product specifications | Detail as the attached file | ||
| Length | Any length | |||
| 3. | Power requirement | Type | 440v/3ph/50hz | Motor brand shanghai Lichao |
| Main Motor power | 4kw | |||
| Cutter power | 4kw | |||
| 4. | Forming speed(m/min) | 10-15m/min | Not include the time of cutting | |
| 5. | Manual Decoiler(Optional) | Type | Manual | |
| Max capacity | 5t | |||
| Suitable coil OD(MM) | 1220 | |||
| Suitable coil ID(MM) | 508 | |||
| 6. | Forming stand | 14 | Depend on actual design | |
| 7. | Thickness of structure | 16mm | ||
| 8. | Forming shaft diameter(mm) | 70 solid | ||
| 9. | Type of cutting | Roll formed and length-set cutting | ||
| 10. | Control system | Panasonic PLC and inverter | ||
| 11. | Install dimension(depend on the final design) | 7.8m×1.5m×1m | Without panel length | |
| 12. | Total weight(Approx) | 4.6T | Depend on final design | |
This roofing is the most popular model of roofing, its widely used in roofing and wall of the workshop.
There is two cylindas on the cutting head of this machine, the hydraulic oil is running into the cylinda, control the cutter easily.
Copyrights © Cangzhou ZhongHeng Machine Manufacture Co.,ltd All Rights Reserved
