E-mail：sales1@zhrollformingmachine.com
Components:Decoiler, Main Machine, PLC, Hydraulic System, Run out Table
L shape Angle section roll forming machine
Manual Decoiler—pre-passive leveler and guider---Roll Forming — None-stop Cutting—Computer Control System—Hydraulic Control System—Runout table
Technical Parameters
A Sheet Specifications
1. | Coil Type | Galvanized steel |
2. | Width | Confirmed after the final drawing designed |
3. | Thickness range | 1.2mm |
B Machine Specifications
1 |
Power Requirement
| Voltage | 600v/3ph/60hz |
Main Motor power | K77-7.5KW Siemens brand | ||
Cutter power | 5.5kw(with cooling system)Siemens brand +2.5kw (servo motor Yaskawa brand) | ||
2 | Forming speed | 45m/min | |
3 | Forming stations | 10 row | |
4 | Thickness of structure | 30mm | |
5 | Forming shaft diameter | 50mm | |
6 | Screen | Touch screen | |
7 | Type of cutting | Non-stop cutting | |
8 | PLC control | XINJIE BRAND | |
9 | Transducer | Delta Brand | |
10 | Install dimension(depend on the final design) | 4.6m×0.85m×1.3m | |
11 | Total weight (Approx) | 2.5T | |
12 | All electrical wiring and components must meet Canadian Electrical Authority standards | ||
Copyrights © Cangzhou ZhongHeng Machine Manufacture Co.,ltd All Rights Reserved
